Zscaler favicon
Zscaler Status zscaler.com

Is Zscaler down?

Zscaler.com is currently up

Our monitoring probes can reach zscaler.com and complete a full check without errors. The latest automated check was run November 16, 2026, 19:56 GMT+0 from North America and didn't detect any unusual response times or error codes.

The other half

Is it Zscaler, or is it you?

This page answers half the question. It tells you about Zscaler. It cannot tell you whether your own site is experiencing an incident, and that is the part your users notice. UptimeRobot checks your websites, APIs and servers, and tells you when one of them does.

50 monitors for your own websites. No card.

Current status

Up

Currently up for 2mo 8d 12h


Last check

Checked every 5 minutes


Last 24 hours

100%

Checks on provider website have reported 0 incidents, 0m down

Response time

N/A

Average

N/A

Minimum

N/A

Maximum

The response-time chart above shows Zscaler's status over time, based on our automated checks. Each point on the chart represents the result of a check run every 5 minutes.

Last 7 days

100%

0 incidents, 0m down

Last 30 days

100%

0 incidents, 0m down


Last 365 days

100%

0 incidents, 0m down

Latest incidents

Root cause
Duration

Zscaler: Administration UI Issue
42m

Zscaler: Device registration and portal failure for Zscaler Client Connector
14m

Zscaler: Sandbox Issue
1h 4m

Zscaler: Degraded Performance for Some Users Connecting Through Dallas, Miami, and Atlanta
1h 35m

Zscaler: Chennai II Datacenter Issue
1h 25m

Zscaler: Mexico City I, Mexico City II Datacenter Issue
3h 10m

Zscaler: Experience Center Issue
4h 9m

Zscaler: Audit Logs Issue
1h 48m

Zscaler Admin Console issue
1h 41m

Zscaler: ZCC Flow Logging Issue
19d 21h

View 2026 Zscaler outage archive →

How our status checker works?

We continuously monitor Zscaler from our own infrastructure to give you an objective view of its status. Every every 5 minutes, we send a request to zscaler.com from our primary location in the US and verify that the site responds correctly and within a normal time frame.

If the first check fails, we immediately repeat it from a second location to avoid false positives. When that second attempt also fails, we trigger a third confirmation check from a random global location. Only if all three checks confirm a problem, we mark Zscaler as having an issue or a major outage.

Frequently asked questions

No, Zscaler is working normally. UptimeRobot monitors zscaler.com around the clock from multiple global locations, and our latest checks show no confirmed issues.

You can see the current status and recent incident history at the top of this page. If you're still having trouble reaching zscaler.com, the issue may be local to your connection, DNS, VPN, browser, or device.

UptimeRobot shows Zscaler as operational right now, which means zscaler.com is responding normally from our global monitoring locations.

If you're still having trouble accessing it, the issue may be local to your connection. Try switching browsers, devices, or networks, and check your DNS or VPN settings.

Try opening zscaler.com from another browser, device, or network (e.g., mobile hotspot). You can also disable your VPN, clear DNS cache, restart your router, or check whether your internet provider is having issues. If the site works elsewhere, the problem is likely local rather than a confirmed Zscaler outage.

We monitor zscaler.com from our own infrastructure. When a check fails, we repeat the test from two other randomly chosen global locations to eliminate false positives. If these checks fail too, we mark Zscaler as down.

A Zscaler outage means our checks detected that zscaler.com was not responding correctly after multiple checks from different global locations. This doesn't always mean every user is affected. Some outages are regional, some affect only certain features, and some appear as slow loading instead of a full failure.

Not exactly. UptimeRobot monitors zscaler.com from the outside, so we can detect when something is wrong and show high-level symptoms such as connection timeouts, HTTP errors, or failed responses from specific regions.

However, we don't have visibility into internal systems, so we can't identify the exact root cause (like a failed deployment, database issue, or infrastructure problem).

What we can show you:

  • When the issue started and when it was resolved
  • How long the outage lasted
  • Which regions were affected
  • The type of error observed (for example, timeouts or HTTP status codes like 500 or 404)

For detailed root cause information and official updates, we recommend checking Zscaler's official status page.

Yes, UptimeRobot lets you set up your own monitors for zscaler.com so you get alerted the moment something goes wrong, and before your users notice. Our free plan includes 50 monitors with 5-minute check intervals. You'll also get details that this public status page doesn't show, such as response headers, response body, region-level results, and a full activity log.

Create a free UptimeRobot account and set up a monitor for zscaler.com. You'll receive alerts via email, SMS, Slack, webhooks, and other integrations as soon as we detect an issue, and again when it's resolved. Because we monitor independently from Zscaler's own infrastructure, you may be notified even before their official status page acknowledges the issue.

Alternatively, you can check whether Zscaler offers notifications on its official status page.

Over the last 5 years, the average resolved outage for Zscaler lasted 2d 1h. That average is the mean difference between created_at and resolved_at across 10 resolved incidents we track for this provider.

Over the last 5 years, Zscaler appears on our outage timeline 10 times. Comparable security tools averaged 9 incidents in the same period, so Zscaler has about as many incidents as the average security tool.

4.7
stars out of 5
284+ reviews on

Start monitoring in 30 seconds.

There's nothing to install. No credit card required. 50 monitors for free.